Used. Has a very little rust. The top front forks ball bearing assembly fits underneath the top mounting bolt, the thin mounting washer, and the thick screwin mounting washer and it fits directly into the top of the moped frame where the forks fit in. The bottom front forks ball bearing assembly fits at the bottom of the front forks top stem and fits into the bottom of the hole in the frame for the front forks. Sold "as is".
Used. Rusted but fully functional. Top mounts around front fork stem. Bottom mounts around front axle. Max. carrying capacity rated at 15 pounds. Sold "as is".
Used. Bolts have special markings on them and might be hardened bolts. Slightly longer than the right side bolts. Rusted but fully functional. Bolts have special markings on them and might be hardened bolts. Sold "as is".
Used. Bolts have special markings on them and might be hardened bolts. Slightly shorter than the right side bolts. Rusted but fully functional. Bolts have special markings on them and might be hardened bolts. Sold "as is".
Used. Lightly rusted, fully functional. Rusted on the inside. Full imprinted labeling reads "WALD 4", "INSERT TO HIDE THIS LINE", with an arrow and a line, and "A149-78", with a 1 on the next line. The bottom cylinder where it inserts into the front fork stem is a little more than 3/4" in diameter. The top part has a smooth area inside that clamps around a 1" handlebar. Sold "as is".
Used. Approx. 150mm or 6" long, M8 threads. Special marking, might be a hardened bolt. Only very minimal rust. Approx. 150mm or 6" long, M8 threads. Special marking, might be a hardened bolt. Sold "as is".
Used. Slightly bent but functional. Bolt has a square design underneath the bolt head to fit into a square hole in the WALD 4 handlebar stem. Bolt is slightly bent. Small special marking on the bolt, so it might be a hardened bolt. Washer is rusted, bolt is blemished/discolored. Sold "as is".
Sign In
