Royal AG15X Shredder 230mm Roller Shaft Support Bar

Royal AG15X shredder metal shredder roller shaft support bar. 230mm long, 10mm in diameter with 2 presumably M5 mounting bolt holes.

I'm selling many parts from a complete partout of a Royal AG15X 15-sheet cross-cut or confetti shredder. I bought the shredder in Jan. 2002 and it broke in Aug. 2009, presumably due to totally jammed shredder rollers. I also found 2 broken gears. I totally parted out the Royal AG15X Shredder and every individual part for sale is presumed functional but is not guaranteed. All parts are sold "as is".

Product description: Royal AG15X shredder metal shredder roller shaft support bar. 230mm long, 10mm in diameter with 2 presumably M5 mounting bolt holes.

Product installation: Caution: Rebuilding the shredder rollers is probably very difficult and time-consuming. However, it's a lot cheaper than buying a new quality 15-sheet shredder. If I tried it, I would open the end of both shredder rollers being used that is away from the gear assembly, remove the circlips from both shredder rollers, and remove each shredder roller part one by one from alternating hexagonal shredder rollers until I got to the part that needs replacing. I would very carefully note where every part fits so I could reinstall it exactly the way it was.
Next I would replace the damaged or missing parts.
Next I would replace the parts I removed one at a time alternating between shredder rollers. It's critical to reinstall the parts correctly exactly the same way they were.
Next I would reinsert the circlips and finish reinstalling the side cover of the shredder rollers.
Caution: if you remove both shredder rollers, the only way you can probably reinstall them is to start with empty rollers properly connected to the gear assembly. I think its probably impossible to mesh 2 fully loaded shredder rollers. I think it will only work if you install empty shredder rollers first and then load them with the precisely correctly installed parts.
In order to accomplish this and do it right, I think you'll have to be extremely patient and detail-oriented.
FYI, shredder rollers should be lubricated, but usually aren't. You might want to lubricate the shredder rollers.

Product Condition: Used. Reasonable used shape. Has some marks where the large semi-circle washers rested against it for 7 years. Sold "as is".

Royal AG15X Shredder Product Instruction Manual: Click here.

Shipping and handling price for first item purchased: $5.99.

Shipping and handling price if this is an additional item purchased: $0.49.

Shipping prices are good for the shipment of this product to any location in the continental United States.




Royal AG15X instructional manual

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.