Used E-Z UP Express III Instant Shelter Canopy Part. At each end it has a hole for a M6 bolt and a small black plastic edge. The distance between the outside edge of the M6 bolt hole and the end of the exterior side of the small black plastic end piece is 7mm at one end and 16mm at the other end. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. At each end it has a hole for a M6 bolt and a small black plastic edge. There is also a third M6 bolt hole 449mm from one end. The distance between the outside edge of the M6 bolt hole and the end of the exterior side of the small black plastic end piece is 6.5mm at both ends. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. The is a pivoting attachment. One side has a 23.5mm wide 19.5mm long x 5.5mm deep pocket to insert a white pole part in, while the other side 14mm x 10mm x 8.5mm clip at one corner to allow the other pole to slide one way but not the other. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. The is a black plastic pivoting attachment part that connects the top and bottom outside parts of the peak tress (part 1). One side has a 22.5mm space between 2 44mm black plastic guard rails. The other side is smooth. Has 2 M6 bolt holes 4mm and 13mm from one end. Each bolt hole is a tall hole with a plastic circle around it that extends 4mm taller than the black plastic next to it. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. At each end it has a hole for a M6 bolt and a small black plastic edge. There is also a third M6 bolt hole 507mm from one end and 509mm from the other end. The distance between the outside edge of the M6 bolt hole and the end of the exterior side of the small black plastic end piece is 15.5mm at one end and 16mm at the other end. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. If you buy a slide piece (part 7) with this part and/or an inner leg, the slider piece and/or the inner leg will be pre-installed. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. This is a small thin black plastic 40.5mm x 30mm x 7.25mm connector piece with 2 M6 bolt holes in it and a groove for an inner/outer tress to fit into. 2 of the these small thin black plastic connector pieces fit between an inner/outer tress and another inner/outer tress. The side of one M6 bolt hole is 4mm from one end. One side of the center M6 bolt hole is 16.5mm from one end (with the side of the other M6 bolt hole 4mm from that end) and the other side of the the center bolt hole is 17mm from the other end. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. This is a small thin black plastic 40.5mm x 30mm x 7.25mm connector piece with 2 M6 bolt holes in it and a groove for an inner/outer tress to fit into. 2 of the these small thin black plastic connector pieces fit between an inner/outer tress and another inner/outer tress. The side of one M6 bolt hole is 4mm from one end. One side of the center M6 bolt hole is 16.5mm from one end (with the side of the other M6 bolt hole 4mm from that end) and the other side of the the center bolt hole is 17mm from the other end. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. This is a small thin black plastic 40.5mm x 30mm x 7.25mm connector piece with 2 M6 bolt holes in it and a groove for an inner/outer tress to fit into. 2 of the these small thin black plastic connector pieces fit between an inner/outer tress and another inner/outer tress. The side of one M6 bolt hole is 4mm from one end. One side of the center M6 bolt hole is 16.5mm from one end (with the side of the other M6 bolt hole 4mm from that end) and the other side of the the center bolt hole is 17mm from the other end. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. This is a small thin black plastic 40.5mm x 30mm x 7.25mm connector piece with 2 M6 bolt holes in it and a groove for an inner/outer tress to fit into. 2 of the these small thin black plastic connector pieces fit between an inner/outer tress and another inner/outer tress. The side of one M6 bolt hole is 4mm from one end. One side of the center M6 bolt hole is 16.5mm from one end (with the side of the other M6 bolt hole 4mm from that end) and the other side of the the center bolt hole is 17mm from the other end. Sold "as is".
Used E-Z UP Express III Instant Shelter Canopy Part. Small U-shaped metal snap button. This button connects the bottom inner leg with the top outer leg and holds the top outer leg elevated in place. If you buy this with the inner bottom leg, it will be shipped already inserted into the bottom inner leg. Sold "as is".
Sign In
