|
|
|
Jawa Moped JMFF01 Blue Moped Frame with ID plate (part 11), blue rear swing arm (part 20), an exhaust pipe bracket (part 21), and steering lock without a key. 451 9 210 31 000. (Frame part 1.) From a 1989 Jawa 210 moped.
Used 1989 Jawa 210 moped blue frame parts. Blue Moped Frame with ID plate (part 11), blue rear swing arm (part 20), and exhaust pipe bracket (part 21), and a steering stem lock in the front of the frame without a key. All parts but the ID plate, part 11, the steering stem lock, and the exhaust pipe bracket, part 21, are blue. The blue frame is in poor or very poor condition, with extensive rust in the top of the rear of the frame in the luggage rack area. The exhaust pipe bracket is dirty and rusted. The frame, swingarm, and exhaust pipe mounting bracket are all in good functional shape and work, but these frame parts have damaged paint and they are dirty and partially rusty. This frame has a good 1989 Jawa 210 moped VIN number on the ID plate. Sold "as is".
In Stock
Price: $39.95 $31.96
You Save: $7.99 (20%)
|
|
|
|
|
Jawa Moped JMFF01 Blue Moped Frame with ID plate (part 11), blue rear swing arm (part 20), blue left chain guard (part 41), and a broken black exhaust pipe bracket (part 21). 451 9 210 31 000. (Frame part 1.)
Used 1991 Jawa 1 speed moped blue frame parts. EXHAUST PIPE BRACKET, PART 21, NEEDS REPAIR OR REPLACEMENT. Blue Moped Frame with ID plate (part 11), blue rear swing arm (part 20), blue left chain guard (part 41), and black exhaust pipe bracket (part 21) with a damaged part of the exhaust pipe bracket part broken off. All parts but the ID plate, part 11, and the black exhaust pipe bracket, part 21, are blue. The blue frame is in good used condition, since the moped was probably stored in a garage. However, the left chain guard is bent and is only attached by one rusted-in bolt and the other bolt hole is enlarged and scuffed. The main problem is the exhaust pipe bracket, part 21, where the part that exends back parallel with the swingarm and has 2 holes in it to mount the exhaust pipe onto, is broken off. The broken off part is included, but it has a broken off bolt in one of the 2 bolt holes. One option is to weld on the current or a replacement rear exhaust pipe bracket part to replace the one that broke off. (The current broken off part has 1 functional exhaust pipe mounting hole and the blocked hole could be left as is or turned into a usable exhaust pipe mounting bolt hole one way or the other.) Another option is to hammer out, pound out, and remove the exhaust pipe bracket, part 21, from the frame, and in so doing remove the swingarm from the frame. Then you could pound in a good exhaust pipe bracket, part 21, in place of the broken one, and keep or replace the blue rear swingarm. Sold "as is".
In Stock
Price: $49.95 $39.96
You Save: $9.99 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jawa Moped JMFF07 Kickstand spring. 451 9 228 37 004. (Frame part 7.) From a 1989 Jawa 210 moped.
Used 1989 Jawa 210 moped frame part. One coil wrap of the spring is bent an extra almost 3/8 of an inch. This means this spring is looser fitting and partially worn out. It is dirty and probably has residual rust. It is a weaker, looser, reduced strength spring. The thick spring appears to be bent but solid and unbroken. It is sold "as is" with no guarantee, warranty, or any legal liability whatsoever for the seller.
In Stock
Price: $4.95 $3.96
You Save: $0.99 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jawa Moped JMFF34 Rear fender. Rear wing, weldment. Color: Blue. Conditon: Poor, needs cleaning. 451 9 210 33 001. (Frame part 34.)
Used 1991 Jawa 1 speed moped frame part. This blue rear fender is physically solid, with just 1 bend in it 2 inches from the back from when the frame accidentally leaned on the rear fender during partout work. Cosmetically it is dirty and in poor condition, but it looks look there is a good solid coat of blue paint underneath the dirt and crud, so the appearance should improve after you clean it. There is a solid rusted area in the bottom of the fender that is less than 1" x 9". Sold "as is".
In Stock
Price: $14.95 $11.96
You Save: $2.99 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jawa Moped JMFFX1 Kickstand spring M8 holder bolt. X1. (Frame part X1.)
Used 1991 Jawa 1 speed moped frame part. Bolt is discolored. The 2" of it that fits inside the moped is white and it is partially rusted. Functional because it has an idented ring space in the bolt to hold one end of the kickstand spring in place. (However, the mounting nut does not easily fit into the bolt threads.) Sold "as is".
In Stock
Price: $4.95 $3.96
You Save: $0.99 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sign In
