|
|
|
|
|
|
|
|
|
|
|
|
Jawa Moped JMMH04 right/left brake lever. Hand brake lever assembly. 451 9 228 46 041. RUSTED. (Handlebar part 4.)
Used 1989 Jawa 210 moped handlebar part. Right/left brake lever. Does not include any mounting bolt assembly parts that fit into the back hole or the brake cable end part that fits into the front hole. It is RUSTED. Its cosmetic condition is very poor. If you get this part, you are going to want to derust it one way or the other. (You could start by using CRC freeze-off, PB Blaster, or even WD-40 to remove some of the rust. I'm not sure how to remove the remaining residual rust. Alternately, instead of removing the remaining residual rust, you could probably paint it with metal color rustoleum.) This part is functional but it is in very poor cosmetic condition due to rust, a presumably reduceable and removable or repairable problem. Sold "as is".
In Stock
Price: $7.95 $6.36
You Save: $1.59 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jawa Moped JMMHX12 right/left brake lever spring. Partially rusted. (Handlebar part X12.)
Used 1989 Jawa 210 moped handlebar part. This break lever spring is a useful part that causes your handlebar brake lever to spring back to its regular position of not using the brakes. Partially rusted, particularly the long part that fits inside the brake lever. It can use some very quick derusting (wiping with CRC freeze-off, PB Blaster, or even WD-40). Fully functional. Sold "as is".
In Stock
Price: $4.95 $3.96
You Save: $0.99 (20%)
|
|
|
|
|
|
|
|
|
|
|
Jawa Moped JMMHX3 metal throttle spring. (Handlebar part X3.)
Used 1989 Jawa 210 moped handlebar part. Throttle spring. This key throttle part provides the spring action that keeps the domino metal throttle lever springing back to throttle off position when you let go of it. This is a key moped safety part that causes your moped throttle to automatically shut off the throttle power propelling your moped forward whenever you let go of the throttle. This key throttle part has 3 very thin spring coils, and it is approx. 1 1/4" in diameter. It is specifically designed to fit around a domino metal throttle lever that fits into a black domino throttle grip mounting assembly in a 1989 Jawa 210 moped. One end piece of this throttle coil spring points 3/16" straight up, while the other end piece loops back on itself around a 1/8" space. Sold "as is".
In Stock
Price: $12.95 $10.36
You Save: $2.59 (20%)
|
|
|
|
|
Jawa Moped JMMHX4 metal throttle slide. (Handlebar part X4.)
Used 1989 Jawa 210 moped handlebar part. Throttle slide. This part is specifically for the domino throttle that is from a 1989 Jawa 210 moped. In order to install this part, you need to:
1. Run the handlebar end of the throttle cable through a hole in the black domino throttle mounting bar assembly and then through the very small wire hole in the wire hold next to the 2 screw holes and away from the very small throttle slide bar on one side of this throttle slide part.
2. Fit this throttle slide with the throttle cable wire in it into the domino metal throttle lever.
3. Fit the throttle lever with the throttle slide attached to it into the black domino throttle lever handlebar mounting assembly.
4. Screw in the small throttle slide throttle cable wire holding screw into the throttle slide.
Sold "as is".
In Stock
Price: $9.95 $7.96
You Save: $1.99 (20%)
|
|
|
|
|
Jawa Moped JMMHX5 metal throttle slide screw. (Handlebar part X5.)
Used 1989 Jawa 210 moped handlebar part. Throttle slide screw. This part screws into the domino throttle slide, part JMMHX4, and holds the throttle cable wire in place inside the throttle slide, part JMMHX4. This part is specifically designed to screw into the domino throttle slide that is part of the domino brand throttle from a 1989 Jawa 210 moped. Sold "as is".
In Stock
Price: $3.95 $3.16
You Save: $0.79 (20%)
|
|
|
|
|
Jawa Moped JMMHX6 very tiny domino brand throttle lever mounting bolt. (Handlebar part X6.)
Used 1989 Jawa 210 moped handlebar part. Very tiny domino brand throttle lever mounting bolt. This very tiny bolt fits into the top of the domino brand black throttle lever handlebar mounting assembly and it holds the metal throttle lever in place inside of the domino brand throttle lever handlebar mounting assembly. It is specifically for a domino brand throttle assembly from a 1989 Jawa 210 moped. Sold "as is".
In Stock
Price: $2.95 $2.36
You Save: $0.59 (20%)
|
|
|
|
|
Jawa Moped JMMHX7a mounting bolt for a domino brand handlebar mounting assembly for the left brake lever or throttle and right brake lever. (Handlebar part X7a.)
Used 1989 Jawa 210 moped handlebar part. Mounting bolt for a domino brand handlebar mounting assembly for either the left brake lever or the throttle and right brake lever. It is an M6 bolt that has an approx 4.5mm long round cylinder that holds the handlebar mounting assembly in place on the handlebar when it is tightened. It requires an allen or hex wrench to install, adjust, or remove it. This M6 1.0 pitch mounting bolt for the domino brand handlebar mounting assembly on a 1989 Jawa 210 moped might fit other handlebar mounting assemblies that have standard M6 1.0 pitch thread holes for the handlebar mounting bolt but product compatibility is NOT guaranteed. Sold "as is".
In Stock
Price: $2.95 $2.36
You Save: $0.59 (20%)
|
|
|
|
|
|
|
|
|
Sign In
