|
|
|
Jawa Moped JMMW01 Front wheel hub with rim and old inflated cracked 2 1/4" x 16'' tire. 451 9 210 51 002. (Wheel part 1.)
Used 1991 Jawa 1 speed moped wheel part. Does NOT include the front brakes, front axle or any front axle parts. Does NOT include the bushing (part 23) or the packing ring cup (part 4) and packing ring (part 5) or the washer on the interior side of the packing ring cup. It does NOT include the left-side circlip covering the left wheel ball bearing. It DOES include 2 non-sealed wheel bearings and the spacer tube between them. NEEDS REPAIR. 1. It MIGHT but PROBABLY DOES NOT need new ball bearings. (I suspect the rear wheel needs new ball bearings, but the front wheel spins smoothly and doesn't seem like it needs new ball bearings. I'm guessing someone put too much weight, maybe 2 riders, on the moped seat and overloaded and damaged the rear but not the front ball bearings.) 2. Once you've resolved the possible ball bearing issue, you'll need to replace the old cracked front tire to be properly completely safe and avoid the risk of an old cracked moped tire blowing out on the road and causing an accident. The moped tire is 2 1/4" x 16". The front wheel is not 100% straight and sometimes wobbles a little when it spins, but the wobbling did not seem excessive.. The wheel rim and wheel spokes and hub have suprising little rust on them for a 1991 moped, so I'm guessing the moped was probably stored in a garage. Sold "as is", NEEDING AT LEASE A NEW 2 1/4" x 16" TIRE, with no garantee or warranty, and no legal liability whatsoever for the seller. Sold "as is".
In Stock
Price: $25.95 $20.76
You Save: $5.19 (20%)
|
|
|
|
|
Jawa Moped JMMW01 Front wheel hub with rim and old inflated cracked 2 1/4" x 16'' tire. 451 9 210 51 002. (Wheel part 1.) From a 1989 Jawa 210 moped.
Used 1989 Jawa 210 moped wheel parts. Does NOT include the front brakes, the front axle or any front axle parts. Does NOT include the bushing (part 23) or the packing ring cup (part 4) and packing ring (part 5) or the washer on the interior side of the packing ring cup. It does NOT include the left-side circlip covering the left wheel ball bearing. It DOES include 2 non-sealed wheel bearings and the spacer tube between them. You can probably get all of the non-included wheel and axle parts from your current front wheel and axle and brakes.
Ball bearings are probably good, since the front wheel spins quietly and smoothly around the front axle.
NEED A NEW 2 1/4" x 16" TIRE AND INNER TUBE. DO NOT USE THE CURRENT SEVERELY CRACKED TIRE.
NEEDS REPAIR. You will need to replace the old severely cracked front tire to be properly completely safe and avoid the risk of an old severely cracked moped tire blowing out on the road and causing an accident. The moped tire is 2 1/4" x 16". The front wheel is not 100% straight and sometimes wobbles a little when it spins, but the wobbling did not seem excessive. Most of the noticeable wobble is probably due to the damaged tire, not the wheel. The wheel rim and wheel spokes and hub have rust of them but they are still fully functional. Sold "as is", NEEDING AT LEAST A NEW 2 1/4" x 16" TIRE, with no guarantee or warranty, and no legal liability whatsoever for the seller. Sold "as is".
In Stock
Price: $25.95 $20.76
You Save: $5.19 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jawa Moped JMMW31 Rear wheel hub with rim and old inflated cracked 2 1/4" x 16'' tire and pedal drive sprocket. 451 9 207 56 001. (Wheel part 31.)
Used 1991 Jawa 1 speed moped wheel part. Does NOT include the main rear wheel drive sprocket, rear brakes, rear axle or any rear axle parts. Does NOT include the bushing (part 23) or the packing ring cup (part 4) and packing ring (part 5). It does not include the packing ring cup (part 37), packing ring (part 5), washer (part 6), Circlip size 28 (part 11). It DOES include the the pedal chain rear drive sprocket, 2 wheel bearings, and the spacer tube between them. NEEDS REPAIR. 1. IT MIGHT/MIGHT NOT NEED NEW BALL BEARINGS. (The wheel spins easily and spins straight, BUT I heard a major grinding noise when I sat on the moped and moved the moped and I hear some grinding noise when I tested spinning the rear wheel on the rear axle. 2. Once you've resolved the possible ball bearing issue, you'll need to replace the old cracked rear tire to be properly completely safe and avoid the risk of an old cracked moped tire blowing out on the road and causing an accident. The moped tire is 2 1/4" x 16". The wheel is relatively straight. The wheel rim and wheel spokes and hub have suprising little rust on them for a 1991 moped, so I'm guessing the moped was probably stored in a garage. Sold "as is", NEEDING REPAIR, with no garantee or warranty, and no legal liability whatsoever for the seller. Sold "as is".
In Stock
Price: $24.95 $19.96
You Save: $4.99 (20%)
|
|
|
|
|
Jawa Moped JMMW31 Rear wheel hub with rim and old inflated cracked 2 1/4" x 16'' tire and pedal drive sprocket. 451 9 207 56 001. (Wheel part 31.) From a 1989 Jawa 210 moped.
Used 1989 Jawa 210 moped rear wheel parts. Does NOT include the main drive sprocket, brakes, rear axle or any rear axle parts. Does NOT include the bushing (part 23) or the packing ring cup (part 4) and packing ring (part 5). It does not include the packing ring cup (part 37), packing ring (part 5), washer (part 6), or circlip size 28 (part 11). It DOES include the the pedal chain rear drive sprocket, 2 wheel bearings, and the spacer tube between them.You can probably get all of the non-included wheel and axle parts from your current rear wheel, rear axle, rear main drive sprocket, and rear brakes.
Rear wheel ball bearings are probably worn and could use replacing, since the rear wheel spins loudly but freely around the rear axle. They probably still work as is, but I won't guarantee it. They might need replacing.
Inner tube leaks and the tire is punctured and cracked. NEEDS A NEW 2 1/4" x 16" TIRE AND INNER TUBE. DO NOT USE THE CURRENT SEVERELY CRACKED TIRE.
NEEDS REPAIR. You will need to replace the old severely cracked rear tire to be properly completely safe and avoid the risk of an old severely cracked moped tire blowing out on the road and causing an accident. The moped tire is 2 1/4" x 16". The rear wheel is not 100% straight and sometimes wobbles a little when it spins, but the wobbling did not seem excessive. The wheel rim and wheel spokes and hub have rust of them but they are still fully functional. Sold "as is", NEEDING AT LEAST A NEW 2 1/4" x 16" TIRE AND INNER TUBE, with no guarantee or warranty, and no legal liability whatsoever for the seller. Sold "as is".
In Stock
Price: $27.95 $22.36
You Save: $5.59 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sign In
