|
|
|
Puch Korado Moped Bing 18/14/108 Carburetor
Puch Korado Moped Bing 18/14/108 Carburetor with pre-installed Choke Cable. Choke cable includes handlebar adjustment bolt assembly and the very small cylinder part at the end of the choke cable. Carburetor does not include 2 cable boots, part 19 in the carburetor parts diagram. I've parted out...
In Stock
Price: $109.95 $98.95 $79.16
You Save: $30.79 (28%)
|
|
|
|
|
Puch Korado Moped Ducati CDI Ignition
Puch Korado Moped Ducati CDI Ignition. It is labeled "32399510 98 5". It was working in 2005 when the Puch Korado moped engine broke. Does not include the mounting bolts, mounting plate, or the 5 1/2" black wire with one wire connector clip and one bolt mounting clip with a hole in the middle. (The extra parts are $5 extra if you want to buy them.)
In Stock
Price: $69.95 $62.95 $50.36
You Save: $19.59 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Cylinder Cover Gasket
Puch Korado Moped E50 Engine Cylinder Cover Metal Gasket. This metal gasket fits between the cylinder cover/head cylinder head and the cylinder. FYI, according to mopedarmy.com, "This [Puch Korado engine's] cylinder/top end is highly sought-after by many performance tuners, because even without modification, it can perform...
In Stock
Price: $9.95 $8.95 $7.16
You Save: $2.79 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Cylinder Mounting Bolt
Puch Korado Moped E50 Engine Cylinder Mounting Bolt. This M6 x 1.0 pitch bolt is approx. 104mm long and it has approx. 15mm of M6 1.0 threads on each end. In between the M6 x 1.0 x 15mm ends is a smooth M6 thin cylinder that is...
In Stock
Price: $9.95 $8.95 $7.16
You Save: $2.79 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Drive Sprocket Circlip
Puch Korado Moped E50 Engine Chain Drive Sprocket Small Circlip. This small circlip holds the small drive sprocket in place on the driveshaft. FYI, according to mopedarmy.com, "This [Puch Korado engine's] cylinder/top end is highly sought-after by many performance tuners, because even without modification, it can perform...
In Stock
Price: $5.95 $5.35 $4.28
You Save: $1.67 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Ducati Stator Plate
Puch Korado Moped E50 Engine Ducati Stator Plate for a CDI Ignition System. This is the Ducati metal base plate for the engine's CDI ignition system that the CDI ignition coil and the light coil are mounted onto. It fits inside the Ducati flywheel/magneto. It is imprinted with the...
In Stock
Price: $17.95 $16.15 $12.92
You Save: $5.03 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Flywheel Mounting Nut
Puch Korado Moped E50 Engine Flywheel Mounting Nut. I've parted out a probably 1990's Puch Korado moped engine, probably a pedal start engine with a CDI ignition. The engine is imprinted with the labels "E50", "P2A 1M", and "CM 49". (The engine crankcase halves and the engine side cover might...
In Stock
Price: $4.95 $4.45 $3.56
You Save: $1.39 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Flywheel/Magneto Cover
Puch Korado Moped E50 Engine Flywheel/Magneto Cover. The Puch logo is taped over with plain black duct tape. The inside has an approx 7/8" wide black non-metal washer-shaped surface on the part of the inside that is closest to the exterior of the installed cover. I've...
In Stock
Price: $19.95 $17.95 $14.36
You Save: $5.59 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine M6 x 1.0 x 30mm Hex Bolt
Puch Korado Moped E50 Engine Short M6 x 1.0 pitch x 30mm Engine Crankcase Allen/Hex Bolt. Good used quality. Requires a size 5 allen/hex wrench to install. I've parted out a probably 1990's Puch Korado moped engine, probably a pedal start engine with a CDI ignition. The...
In Stock
Price: $1.44 $1.30 $1.04
You Save: $0.40 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine M6 x 1.0 x 30mm Hex Bolt.
Puch Korado Moped E50 Engine Short M6 x 1.0 pitch x 30mm Engine Crankcase Allen/Hex Bolt. Poor used quality. Requires a size 5 allen/hex wrench to install. I've parted out a probably 1990's Puch Korado moped engine, probably a pedal start engine with a CDI ignition. The...
In Stock
Price: $1.00 $0.90 $0.72
You Save: $0.28 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine M6 x 1.0 x 50mm Hex Bolt
Puch Korado Moped E50 Engine Long M6 x 1.0 pitch x 50mm Engine Crankcase Allen/Hex Bolt. Good used quality. Has 24mm of M6 1.0 threads at the end, then 26mm of a thin M6 round or cylinder-shaped bolt. Requires a size 5 allen/hex wrench to...
In Stock
Price: $1.95 $1.75 $1.40
You Save: $0.55 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine M6 x 1.0 x 50mm Hex Bolt.
Puch Korado Moped E50 Engine Long M6 x 1.0 pitch x 50mm Engine Crankcase Allen/Hex Bolt. Poor used quality. Has 24mm of M6 1.0 threads at the end, then 26mm of a thin M6 round or cylinder-shaped bolt. Requires a size 5 allen/hex wrench to...
In Stock
Price: $1.25 $1.12 $0.90
You Save: $0.35 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Magneto Lighting Coil
Puch Korado Moped E50 Engine Presumably Ducati Magneto Lighting Coil (that is presumably part of a CDI ignition system) with a yellow wire. Includes an approx. 10" yellow wire, 2 small mounting bolts, and 2 small mounting washers. (I'm presuming it is the not the ignition coil with a green...
In Stock
Price: $19.95 $17.95 $14.36
You Save: $5.59 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Main Driveshaft Assembly
Puch Korado Moped E50 Engine Main Driveshaft Assembly with Main Drive Gear, Ball Bearing, Oil Seal, 2 Large Circlips and 2 Small Circlips to hold the ball bearing in place. Does not include the external main chain drive gear and the small circlip to hold the main chain drive gear...
In Stock
Price: $74.95 $67.45 $53.96
You Save: $20.99 (28%)
|
|
|
|
|
Puch Korado Moped E50 Engine Manifold or Intake Valve
Puch Korado Moped E50 Engine size 14 Manifold or Engine Intake Valve with Gasket. It has the label "14" imprinted on it. This part connects the carburetor to the engine cylinder. Includes a good used manifold/intake gasket, 2 mounting bolts, and 2 mounting lock washers. This part connects to...
In Stock
Price: $21.95 $19.75 $15.80
You Save: $6.15 (28%)
|
|
|
Sign In
