Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". 2 small mounting bolt holes are 9mm from one edge and 20.7mm apart from each other, and approx. 37mm apart from the 3rd mounting bolt hole, which is approx 10mm apart from the flat plane of the other edge. The part that fits onto the main turn signal has OK used condition. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". 2 small mounting bolt holes are 9mm from one edge and 20.7mm apart from each other, and approx. 36mm apart from the 3rd mounting bolt hole, which is approx 9mm apart from the flat plane of the other edge (and 13.2mm more deeply recessed than the other edg 1 of 3 internal mounting bolt holders is broken. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include light, lens, 3 small mounting screws, or an M8 mounting nut. Slightly damaged. 1 internal turn signal holder is shortened, but it will still work. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include light, lens, 3 small mounting screws, or an M8 mounting nut. OK used condition. Electric wires are untested. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include wires, lightbulb holder, light, lens, 3 small mounting screws, hollow M8 mounting bolt/stud, or an M8 mounting nut. OK used condition. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Top of bolt is rusted, but it is still functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Small 51mm x 34mm x 32mm black rectangular box. Labelled "FACOMSA 6[divived by sign]12 V", "10-10 W", "21-21 W", "VOLANTE", "MAGNETICO", "A" [inside a circle], "72 297", "Ref. 100009", "PAT. PEND". Untested. Might/might not work. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Needs cleaning with carburetor cleaner. There is white gunk inside of it so it should be cleaned with carb cleaner before using it. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". It is imprinted with the label "domino". There is a 7/8" tear in the left exterior end of it. It is still functional, but it is literaterally a little rough around the edges [the texture is rough on the left end of it). Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the letters "domino", "BREVETTATTO", and "95" (manufactured in 1995). Fair cosmetic condition, has some scuffs. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the letters "domino", "BREVETTATTO", and "98" (manufactured in Feb. 1998). Fair cosmetic condition, has some scuffs. Exterior of plastic is a lighter shade of gray (probably from rust removal liquid) that could optionally be gently scraped off. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Holds the end of the throttle cable and it slides on the throttle lever (part 11a). Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". It is imprinted with the label "domino". It is partially dirty and could use optional extra cleaning. The circular black plastic on the left side of it is bent for a 1"- 1 1/2" of the outer circumference. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". There is some rust inside of this hollow plastic part. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". If your throttle doesn't spring back properly and you are missing this part, properly installing this part allows your throttle to spring back to "off" position. Caution: installation might be difficult. Part looks good. The spring is coil 3 full times, and one end points up 5mm and the other end has a 4mm wide 5mm long (exterior dimensions) U or fishhook shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include any bolts or any other parts except for the choke/carburetor air flow lever of the bottom side of the throttle mounting assembly. Part looks good. The spring is coil 3 full times, and one end points up 5mm and the other end has a 4mm wide 5mm long (exterior dimensions) U or fishhook shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include any bolts or any other parts except for the choke/carburetor air flow lever of the bottom side of the throttle mounting assembly. Part looks good. The spring is coil 3 full times, and one end points up 5mm and the other end has a 4mm wide 5mm long (exterior dimensions) U or fishhook shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include special M6 mounting bolt. Flat black paint looks good. Can use some cleaning. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". M6 x 17 allen/hex bolt with a special bushing around it to hold the mounting assembly in place. Requires an M5 allen/hex wrench. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the label "2" on the inside. The gripping ridges on the interior semicircle that grips the handlebar are almost completely worn away. Exterior flat black paint is in OK shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the label "8" on the inside. The gripping ridges on the interior semicircle that grips the handlebar are almost completely worn away. Exterior flat black paint is in OK shape except the bottom where it rests bolted on top of the top of the front fork assembly. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Should help the front brakes release instantly when you release the right brake lever. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Includes a small hole for one end of the front brake cable to fit into. This part then clamps onto one end of the front brake cable. Dirty, grimy, and has some rust, and can use derusting (spraying/wiping with CRC freeze-off, PB Blaster, or even WD-40). Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Outer cable sheath is torn in multiple places.along 9 inches of cable, and the exterior of the inner sheath is rusted. Cable still works, but does not slide as easily as a new rear brake cable. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". This part was rusted, then derusted and removed. Still has some rust. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Has some rust, but it is fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Fair to good cosmetic condition. Has a few blemishes but no major scratches. Fully functional. 4 clip-on bottom mini-clips are good. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Includes a small hole for one end of the front brake cable to fit into. This part then clamps onto one end of the front brake cable. Dirty, grimy, and has some rust, and can use derusting (spraying/wiping with CRC freeze-off, PB Blaster, or even WD-40). Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Labeled "korado" and "FACOMSA". Goes up to 40mp 60km/h. Includes 83mm x 55m rectangular black speedomter panel, speedometer,needls, and interior speedometer assembly. Does not include the speedometer clear plastic cover, the speedometer housing, or th Working when last used in 2005. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Labeled "korado" and "FACOMSA". Goes up to 40mp 60km/h. Includes 83mm x 55m rectangular black speedomter panel, speedometer,needls, and interior speedometer assembly. Does not include the speedometer clear plastic cover, the speedometer housing, or th Working when last used in 2005. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Poor cosmetic condition. Has some rust of the top of the bottom and the insides of the sides and blemishes and a little rust elsewhere. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Poor cosmetic condition. Has some blemishes or rust. Fully functional thin M12 speedometer assembly mounting nut. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Poor cosmetic condition. Has some blemishes or rust. Fully functional thin M12 speedometer assembly mounting nut. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Quick release. It has a lengthwise hole in it that you can install or remove the cable in. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Round part with gear-shaped outside of the circle with 6 plastic gear teeth. 19mm in outer diameter, 7mm thick. Quick release. It has a hole in it that you can install or remove the cable in. Grippable, easily hand-adjustable. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the label "FACOMSA". Very grimy but it spins fine, so it is presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the letters "domino", "BREVETTATTO", and "98" (manufactured in Feb. 1998). Fair cosmetic condition, has some scuffs. Exterior of plastic is a lighter shade of gray (probably from rust removal liquid) that could optionally be gently scraped off. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the letters "domino", "BREVETTATTO", and "98" (manufactured in Feb. 1998). Fair cosmetic condition, has some scuffs. Exterior of plastic is a lighter shade of gray (probably from rust removal liquid) that could optionally be gently scraped off. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the letters "domino", "BREVETTATTO", and "98" (manufactured in Feb. 1998). Fair cosmetic condition, has some scuffs. Exterior of plastic is a lighter shade of gray (probably from rust removal liquid) that could optionally be gently scraped off. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Has a red sticker labelled "12", presumably for a 12 volt headlight bulb. Imprinted with the labels "19782", "C.E.V.", and "PAT. PEND.". This thin black plastic CEV headlight bucket has no holes in it, just a slot with one male electrical connector to Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Metal headlight bulb base is 15mm in diameter and has 2 small bumps on either side near the bottom to hold it in place. It has one large metal bump electrical contact point at the bottom the the one filament in the headlight. Imprinted with the labels " Untested. Filament looks good. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Red CEV tail light lense. The back side is imprinted with the labels "240", "CEV" (in an oval), "SAE LST 80", "D.O.T.", "SP G 31", "CE-0053", "T4W-R10w" "E3" (in a circle), "DGM 37419 AR", " K 12507", "A" in a circle, "35107", "50R-0044150". Fair cosmetic condition. Some scuffs and scratches, nothing broken. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Bolts threads may be very grimy but it is presumed functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". The front contains 4 separate wires, a light green wire, a red wire, a brown wire, and a yellow wire. Each wire has a male electrical connector. The back also contains a light green wire, a red wire, a brown wire, and a yellow wire. The brown wire and The wires in the back and the black cable sheath seems old and brittle. The wires in the front seem fine. Untested. Might/might not work. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Includes the small electrical control box with the turn signal and horn button and the connected wires, including a white and a red wire from the electrical control box, a light green wire going to the speedometer with 2 female clips to connect to the spe Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Round cylinder part is approx. 2.6mm in diameter, bolt threads are approx. 2.8mm in diameter. Probably M3 x 17, but I'm not sure. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Has 2 prongs or male electrical connector clips. Round black plastic horn. It fits onto the right side black plastic side cover. Does not include 2 small connector bolts. Imprinted with the label "TR8" on the front. Imprinted with the labels "TRANSVA Untested. Has some rust on the metal part inside the front of the horn. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Has 2 prongs or male electrical connector clips. Round black plastic horn. It fits onto the right side black plastic side cover. Does not include 2 small connector bolts. Imprinted with the label "TR8" on the front. Imprinted with the labels "TRANSVA Untested. Has some rust on the metal part inside the front of the horn. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Includes the right side small electrical control box with the switch (presumably the engine on-off switch) and a small red button. Also includes at the center of the wiring 4 very small female connector clips (approx. 3.5mm inner diameter, approx 4.6mm o Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Also includes a yellow wire with a male electrical connector clip and a red wire with a shielded female electrical clip connector. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Metal part is imprinted with the letters "-OSRAM 5008 ITALY 12V R10W 37R E1 00211-n7p-". Untested but the filament looks good. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Small white wire assembly. Possibly the rear grounding wire. Contains a M5 mounting bolt ring to mount onto an M5 bolt (probably an electrical grounding bolt). After 2" of white wire, there is female prong electrical connector. After 2 more inches the Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty, has some rust, can use derusting (spraying/wiping with CRC freeze-off, PB Blaster, or even WD-40). Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include brake shoes. Does not include v-shaped brake shoe spring. Does not include front brake cable lever. Does not include front brake cable lever mounting bracket. 110mm outer diameter. 101-103mm inner diameter. Cylinder to mount the bra Dirty, should be cleaned. Has some rust. Could be derusted before use (sprayed/wiped with CRC freeze-off, PB Blaster, or even WD-40 before use). Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". The cable brake lever turns this part that moves the brake pads. Has a rounded 9.5mm x 6mm hole for the front brake cable lever to mount onto and M6 threads for the mounting bolt and washer. (Connects to a front brake lever with a 9.5mm/10mm x 6mm round Dirty, should be cleaned. Has some rust. Could be derusted before use (sprayed/wiped with CRC freeze-off, PB Blaster, or even WD-40 before use). Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Has some rust. Can use optional derusting (spraying/wiping with CRC freeze-off, PB Blaster, or even WD-40). Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". These might/might not be usable as rear brake pads too. The brake shoes are 18mm in thickness. The brake pads are a good 3.9-4mm thick. Dirty. Should be thoroughly cleaned before use. (Be careful to avoid accidentally lubricating the brake pads when cleaning it.) Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty, should be cleaned. Heavily rusted, should be derusted before use (sprayed/wiped with CRC freeze-off, PB Blaster, or even WD-40 before use). Sold "as is".
Sign In
