Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Imprinted with the label "2 98", so it was presumed manufactured in Feb. 1998. It looks like it is in excellent used condition. It looks clean and all of 3 clutch shoes have almost 7mm worth of black clutch shoe material at its widest thickness. This clutch has the 3 distinctive light blue springs. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Imprinted with the label "10 95", so it was presumed manufactured in 1995. Clutch shoe has approx. 6.2-6.7mm worth of black clutch shoe material at its widest thickness. Clutch shoe may have some rust on it, but it is still fully functional. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Puch Korado Moped E50 Engine Main Driveshaft Assembly with Main Drive Gear, Ball Bearing, Oil Seal, 1 Large Circlip and 2 Small Circlips to hold the ball bearing in place. Includes 1 of 2 of part 33. Does not include the external main chain drive gear an Oil seal has 2 very small bumps on the round outside of it from where it was squeezed a little between the top and bottom engine halves. Sold "as is".
Puch Korado Moped E50 Engine Main Driveshaft Assembly with Main Drive Gear, Ball Bearing, Oil Seal, 2 Large Circlips and 2 Small Circlips to hold the ball bearing in place. Does not include the external main chain drive gear and the small circlip to hold the main chain drive gear...
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". It is rusted and it no longer has any protective rubber sides. Inner gripping teeth and outer chain teeth look good. Can use derusting but it should also work as it. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Has some russt. Needs derusting (spraying with CRC Freeze-off, PB Blaster, or even WD-40). Presumed fully functional. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Has some residual rust. Presumed fully functional. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Has some residual rust. Presumed fully functional. Sold "as is".
Puch Korado Moped Engine Cylinder Mounting Bolt. This M6 x 1.0 pitch bolt is approx. 104mm long and it has approx. 15mm of M6 1.0 threads on each end. In between the M6 x 1.0 x 15mm ends is a smooth M6 thin cylinder that is 74mm long. 4 of these metal bolts, each sold separately, fit into the crankcase and the engine cylinder and cylinder head are mounted onto these bolts. FYI, according to mopedarmy.com, "This [Puch Korado engine's] cylinder/top end is highly sought-after by many performance tuners, because even without modification, it can perform better than some kits."
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". "Li" and "18 C1" is inscribed on the bolt head. Has some residual rust. Presumed fully functional. Sold "as is".
Puch Korado Moped E50 Engine Long M6 x 1.0 pitch x 50mm Engine Crankcase Allen/Hex Bolt. Good used quality. Has 24mm of M6 1.0 threads at the end, then 26mm of a thin M6 round or cylinder-shaped bolt. Requires a size 5 allen/hex wrench to...
Puch Korado Moped E50 Engine Long M6 x 1.0 pitch x 50mm Engine Crankcase Allen/Hex Bolt. Poor used quality. Has 24mm of M6 1.0 threads at the end, then 26mm of a thin M6 round or cylinder-shaped bolt. Requires a size 5 allen/hex wrench to...
Puch Korado Moped Engine Short M6 x 1.0 pitch x 30mm Engine Crankcase Allen/Hex Bolt. Good used quality. Requires a size 5 allen/hex wrench to install.
Puch Korado Moped E50 Engine Short M6 x 1.0 pitch x 30mm Engine Crankcase Allen/Hex Bolt. Poor used quality. Requires a size 5 allen/hex wrench to install. I've parted out a probably 1990's Puch Korado moped engine, probably a pedal start engine with a CDI ignition. The...
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Poor condition. Grimy. May have rust. Should still work. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". One of the 2 black plastic engine seals is labeled "17 40 7", "RD", "8", and "ROLF". This part is partially rusted. He left side main ball bearing (the left side is the side with the shorter crankshaft) is rusted and needs to be repalced. The crankshaft has some rust on it but it is functional. The right side ball bearing is good. The Sold "as is".
Puch Korado Moped E50 Engine Cylinder Cover Metal Gasket. This metal gasket fits between the cylinder cover/head cylinder head and the cylinder. FYI, according to mopedarmy.com, "This [Puch Korado engine's] cylinder/top end is highly sought-after by many performance tuners, because even without modification, it can perform better than some kits."
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Partially rusted. Should be de-rusted. Presumed functional. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Chain is old and dirty and might be stretched. It was presumed working when last used in 2005. Sold "as is".
Puch Korado Moped E50 Engine Presumably Ducati Magneto Lighting Coil (that is presumably part of a CDI ignition system) with a yellow wire. Includes an approx. 10" yellow wire, 2 small mounting bolts, and 2 small mounting washers. (I'm presuming it is the not the ignition coil with a green...
Puch Korado Moped E50 Engine Flywheel/Magneto Cover. The Puch logo is taped over with plain black duct tape. The inside has an approx 7/8" wide black non-metal washer-shaped surface on the part of the inside that is closest to the exterior of the installed cover.
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". Puch Korado Moped Ducati CDI Ignition. It is labeled "32399510 98 5". It was working in 2005 when the Puch Korado moped engine broke. Does not include the mounting bolts, mounting plate, or the 5 1/2" black wire with one wire connector clip and one bolt. Sold "as is".
Used Puch Korado moped engine part from Puch Korado moped engine #2 with clutch shoes imprinted with the label "95". A round hole clip at one end connects to the CDI ignition mounting bracket. The other end has a male connector clip covered by a plastic exterior connector cover. The male connector clip cover is light blue (from repair work), not the initial white connector clip cover. Sold "as is".
Puch Korado Moped Engine Ducati Stator Plate for a CDI Ignition System. This is the Ducati metal base plate for the engine's CDI ignition system that the CDI ignition coil and the light coil are mounted onto. It fits inside the Ducati flywheel/magneto. It is imprinted with the these letters on the back: "DUCATI e", "MADE IN ITALY", "3", and "1 217 031 921". "665" is imprinted in very small letters on the front side. Includes 3 small mounting bolts and 6 small mounting washers.
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". It has a little rust near the bottom. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Poor cosmetic condition, but fully functional. Needs some cleaning. Has a little white sticky label material stuck on it. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". This part helps regulate air flow into the carb and it helps regulate the critical air-to-fuel ratio in the combustion chamber of the engine. Imprinted on the outside with the label "MANET" and "216". Imprinted on the inside with the labels "1", "216 04 Poor to fair cosmetic condition, has some grime, no cracks. At least the inside should be cleaned. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". This part helps regulate air flow into the carb and it helps regulate the critical air-to-fuel ratio in the combustion chamber of the engine. Imprinted on the outside with the label "MANET" and "216". Imprinted on the inside with the labels "216 04 0032 Fair cosmetic condition. It is dirty and at least the inside should be cleaned. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty. May be grimy. May have a little rust. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty. May be grimy. May have a little rust. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty. May be grimy. May have a little rust. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty. May be grimy. May have a little rust. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include the front or rear heat shields. Weighs 6.9 lbs. Weighed 7.8 lbs with the 2 heat shields (not included). CLOGGED. Needs repair. Exterior of the front bent part of the exhaust pipe is rusted. If you think you can unclog this pipe and can't find an unclogged Puch Korado moped exhaust pipe, you can buy this part. If you don't think you can unclog it, do not Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Poor used condition. Heavily scuffed and scratched. Lightly rusted on the exterior and interior sides. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Fair used condition. Heavily scuffed and scratched. Inside is dirty and needs cleaning. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Includes metal air filter element. This part fits onto the rectangular bing 18 carburetor. It is labelled "PUCH" next to a shield logo, and "OM 38015". Sold "as is".
Used Puch Korado moped part. Includes metal air filter element. This part fits onto the rectangular bing 18 carburetor. It is "PUCH" next to a shield logo, and it is presumably labelled "OM 38015" under some duct tape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does NOT Include swing arm or black axel swing. Includes black plastic gas cap. Does NOT include the air vent cap. Gas tank has rust in it and it needs derusting and/or tank relining. Paint is faded and chipped. One part of the bottom of it near the place where the swingarm fits in bent a little and can be bent back if necessary. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". 327mm from center of mounting bolt hole to the center of the other mouting bolt hole whith the coils set of the tightest setting). These are excellent quality adjustable-strength shock absorbers. Partially rusted, but fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Has rust on the top. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Has a little rust. Needs derusting (spraying/wiping with CRC freeze-off, PB Blaster, or WD-40, or dunking in rust remover) (Be careful if derusting it. Rust removal liquid can create a top layer of faded black plastic.) Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the labels "C.S.:21671032-2" and "MTA.:PP TATREN", and labelled as manufactured in 5/98. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the labels "C.S.:21671030-2" and "MTA.:PP TATREN", and labelled as manufactured in 6/98. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". This is a large oversized item. Shipping and handling is expensive for this part. The special 56mm long metal bolt attached to the interior side of the side cover in the center mounting bolt hole is a long bolt with hexagonal sides. There is also a sma Fair cosmetic condition. Fully functional. Has some scuffs but no rips or tears. Dirty. Can use cleaning. Fuel valve decal is in good condition. Mounting bolt on the outside of the center mounting bolt hole has a partially stripped but fully usable Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". This is a large oversized item. Shipping and handling is expensive for this part. The special 56mm long metal bolt attached to the interior side of the side cover in the center mounting bolt hole is a long bolt with hexagonal sides. There is also a sma DAMAGED. There is a big tear in it near the center at the point where the part that tilts up at the front joins the part that is horizontal in the back. The tear on the top extends part of the way to the bottom. Only 2 1/4" of unripped plastic remains Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". This part has 45 M6 bolt holes. Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". This part has 45 M6 bolt holes. Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty and grimy with a lot of residual rust or grime and some current rust. Can use cleaning and derusting (spraying with CRC freeze-off, PB Blaster, or even WD-40. Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Pedal sprocket is predictably grimy. There is some mostly removable rust on the pedal sprocket end of the pedal shaft. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Dirty. Has a little mostly removable rust on it. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". It has 2 very small bends in its straight metal line. It has a 9mm hole for the mounting bolt and a 6mm hole for the chain tensioner bolt. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Bolt has some rust of it. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Nut has some rust on it. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Bolt has a little rust on it. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". I have read that this part, if mounted on the front of a puch moped, can provide much nicer front shock absorbers. (I'm not guaranteeing this and please google this idea before trying it.) Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Poor to fair used condition. Dirty, scuffed. Has grime on the insides. Can use cleaning. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Fair used condition. Has some scratches and scuffs. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". 2 small mounting bolt holes are 9mm from one edge and 20.7mm apart from each other, and approx. 37mm apart from the 3rd mounting bolt hole, which is approx 10mm apart from the flat plane of the other edge. The part that fits onto the main turn signal has OK used condition. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". 2 small mounting bolt holes are 9mm from one edge and 20.7mm apart from each other, and approx. 36mm apart from the 3rd mounting bolt hole, which is approx 9mm apart from the flat plane of the other edge (and 13.2mm more deeply recessed than the other edg 1 of 3 internal mounting bolt holders is broken. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include light, lens, 3 small mounting screws, or an M8 mounting nut. Slightly damaged. 1 internal turn signal holder is shortened, but it will still work. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include light, lens, 3 small mounting screws, or an M8 mounting nut. OK used condition. Electric wires are untested. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include wires, lightbulb holder, light, lens, 3 small mounting screws, hollow M8 mounting bolt/stud, or an M8 mounting nut. OK used condition. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Top of bolt is rusted, but it is still functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Small 51mm x 34mm x 32mm black rectangular box. Labelled "FACOMSA 6[divived by sign]12 V", "10-10 W", "21-21 W", "VOLANTE", "MAGNETICO", "A" [inside a circle], "72 297", "Ref. 100009", "PAT. PEND". Untested. Might/might not work. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Needs cleaning with carburetor cleaner. There is white gunk inside of it so it should be cleaned with carb cleaner before using it. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". It is imprinted with the label "domino". There is a 7/8" tear in the left exterior end of it. It is still functional, but it is literaterally a little rough around the edges [the texture is rough on the left end of it). Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the letters "domino", "BREVETTATTO", and "95" (manufactured in 1995). Fair cosmetic condition, has some scuffs. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the letters "domino", "BREVETTATTO", and "98" (manufactured in Feb. 1998). Fair cosmetic condition, has some scuffs. Exterior of plastic is a lighter shade of gray (probably from rust removal liquid) that could optionally be gently scraped off. Fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Holds the end of the throttle cable and it slides on the throttle lever (part 11a). Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". It is imprinted with the label "domino". It is partially dirty and could use optional extra cleaning. The circular black plastic on the left side of it is bent for a 1"- 1 1/2" of the outer circumference. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". There is some rust inside of this hollow plastic part. Presumed fully functional. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". If your throttle doesn't spring back properly and you are missing this part, properly installing this part allows your throttle to spring back to "off" position. Caution: installation might be difficult. Part looks good. The spring is coil 3 full times, and one end points up 5mm and the other end has a 4mm wide 5mm long (exterior dimensions) U or fishhook shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include any bolts or any other parts except for the choke/carburetor air flow lever of the bottom side of the throttle mounting assembly. Part looks good. The spring is coil 3 full times, and one end points up 5mm and the other end has a 4mm wide 5mm long (exterior dimensions) U or fishhook shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include any bolts or any other parts except for the choke/carburetor air flow lever of the bottom side of the throttle mounting assembly. Part looks good. The spring is coil 3 full times, and one end points up 5mm and the other end has a 4mm wide 5mm long (exterior dimensions) U or fishhook shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Does not include special M6 mounting bolt. Flat black paint looks good. Can use some cleaning. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". M6 x 17 allen/hex bolt with a special bushing around it to hold the mounting assembly in place. Requires an M5 allen/hex wrench. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the label "2" on the inside. The gripping ridges on the interior semicircle that grips the handlebar are almost completely worn away. Exterior flat black paint is in OK shape. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Imprinted with the label "8" on the inside. The gripping ridges on the interior semicircle that grips the handlebar are almost completely worn away. Exterior flat black paint is in OK shape except the bottom where it rests bolted on top of the top of the front fork assembly. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Should help the front brakes release instantly when you release the right brake lever. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Includes a small hole for one end of the front brake cable to fit into. This part then clamps onto one end of the front brake cable. Dirty, grimy, and has some rust, and can use derusting (spraying/wiping with CRC freeze-off, PB Blaster, or even WD-40). Fully functional as is. Sold "as is".
Used 1999 white Puch Korado moped part from a Puch Korado moped with an odometer reading of "06025.2". Outer cable sheath is torn in multiple places.along 9 inches of cable, and the exterior of the inner sheath is rusted. Cable still works, but does not slide as easily as a new rear brake cable. Sold "as is".
Sign In
