|
|
|
Puch moped PMEC01a bottom half of 1 speed E50 crankcase. Part of 349.1.10.332.0. (Part of 1 speed E50 crankcase part 1.)
Basically, there are some extra very light scratches on the cylinder head gasket surface. The inside and outside of the bottom half of the Puch E50 one speed engine crankcase has some surface cracks and other blemishes but the bottom half of the Puch moped engine one speed crankcase is still solid. And there is a lot of grime on the outside of the bottom half of the engine gasket that could optionally be cleaned.
Sold "as is".
In Stock
Price: $24.95 $19.96
You Save: $4.99 (20%)
|
|
|
|
|
Puch Moped PMEC02a M6 x 103 stud bolt for the 1 speed E50 or 2 speed ZA50 engine. 360.1.10.034.1. (1 speed E50 crankcase part 2.)
Used 1 or 2 speed engine crankcase part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. Used part, fully functional, but in poor cosmetic condition. (Since it is an internal engine part, cosmetic condition is probably irrelevant.) Has grime on the bolt threads on both ends. Main solid M6 threadless part of the stud bolt has a lot of residual rust and/or some scratches from removing it. Could use some quick derusting (wiping it with CRC freeze-off, PB Blaster, or even WD-40) before installation. Sold "as is".
In Stock
Price: $3.95 $3.16
You Save: $0.79 (20%)
|
|
|
|
|
Puch Moped PMEC03 1 speed E50 engine clutch engine sidecover. 349.5.10.335.1. (1 speed E50 crankcase part 3.)
Used 1 speed engine crankcase part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. Does not include any other parts. Does not include the clutch engine sidecover gasket (part 4), the oil filler plug (part 16), the oil filler plug seal washer (part 17), or any of the 4 M6 x 25 mounting bolts (part 18). Flat interior surface that fits onto the clutch gasket and the engine crankcase is good but it has a thin film of residue, probably from clutch gasket residue, on it. Has some grime on it and it may have some residual rust. Sold "as is".
In Stock
Price: $21.95 $17.56
You Save: $4.39 (20%)
|
|
|
|
|
|
|
|
|
|
|
Puch Moped PMEC09a M6 x 30 crankcase bolt for the 1 speed E50 engine. 900.1216. (1 speed E50 crankcase part 9.)
Used engine crankcase part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. Black M6 x 30 flat-head screwdriver bolt that holds the top and bottom of the 1 speed E50 crankcase together. May have a little grime on the threads. Flat head screwdriver slot of the top of the bolt is a very little stripped at one end. It still works but it is slightly damaged. Sold cheap "as is".
In Stock
Price: $0.50 $0.40
You Save: $0.10 (20%)
|
|
|
|
|
|
|
|
Puch Moped PMEC10a M6 x 50 crankcase bolt for the 1 speed E50 or 2 speed ZA50 engine. 901.1308. (1 speed E50 crankcase part 10.)
Used engine crankcase part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. Black M6 x 50 flat-head screwdriver bolt that holds the 1 speed E50 crankcase or the 2 speed ZA50 crankcase together. Has 28mm of threads and then approx. 22mm of solid M6 unthreaded bolt. May have a little grime on the threads. Flat head screwdriver slot of the top of the bolt is a very little stripped at one end. It still works but it is slightly damaged. Sold cheap "as is".
In Stock
Price: $0.75 $0.60
You Save: $0.15 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sign In
