|
|
|
Puch Moped PMFF12 Seat stem or seat post. 601.1.23.176.1. (Frame part 12.)
Used moped frame part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. Reasonable used condition. Poor to fair cosmetic condition. Top part of metal has a lot of specs on it. Middle and bottom part of metal has a lot of small rust spots. Presumed fully functional. Sold "as is".
In Stock
Price: $9.95 $7.96
You Save: $1.99 (20%)
|
|
|
|
|
|
|
|
|
|
|
Puch Moped PMFF22 Black plastic cable shield or belly pan. 349.2.20.029.1. (Frame part 22.)
Used moped frame part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. Black plastic cable shield or belly pan. It is in poor cosmetic condition, with silver/gray streaks on both sides of the black plastic belly pan and hundreds of very small silver/grey splotches on the black plastic. Fully functional. Sold "as is".
In Stock
Price: $3.95 $3.16
You Save: $0.79 (20%)
|
|
|
|
|
|
|
|
Puch Moped PMFF35 Puch moped seat. 349.1.23.100.0. (Frame part 35.)
Used moped frame part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. Does not include any Puch moped seat mounting and seat adjustment assembly parts. Poor used condition, with seat fabric stitches undone in 3 or 4 places and a few square inches of goop on the seat fabric, presumably from duct tape. The underside of the seat has some rust. The seat cover with damaged stitching is clamped on the seat with multiple very small slots for the seat at the bottom of the seat. The seat stitching could theoretically be removed and repaired by restitching it, but unless you are skilled with a sewing machine this would probably be too labor-intensive. Sold cheap "as is" with damaged stitching, some goop on the seat fabric, etc. Sold "as is".
In Stock
Price: $19.95 $15.96
You Save: $3.99 (20%)
|
|
|
|
|
Puch Moped PMFF36a Seat mounting assembly connector part and interior seat angle adjustment part. (Frame part 36a.)
Used moped frame part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. This short thick and stubby U-shaped Puch moped seat mounting and seat angle adjustment assembly part fits onto the top of the seat stem, part 12, and the mounting bolt for the seat, part 36, fits through 2 holes in this part. On the 2 exterior sides that the mounting bolt, part 12, fits through, is a circular part of indented radius grooves that 2 external seat angle adjustment parts fit into. This is the interior seat angle adjustment clamp. The clamp is in good shape, with plenty of gripping power. Reasonable used condition, with only a little wear and tear on the seat angle adjustment clamp. Sold "as is".
In Stock
Price: $7.75 $6.20
You Save: $1.55 (20%)
|
|
|
|
|
Puch Moped PMFF36b Seat mounting assembly connector and exterior seat angle adjustment part. (Frame part 36b.)
Used moped frame part from a 1978 Puch Maxi Luxe moped with an odometer reading of 2,808.5 miles. This is a small rectangular metal part with a clamp on the top and bottom of it that fits around a black metal moped seat mounting part at the bottom of the Puch moped seat. The front of this exterior seat angle adjustment clamp has a special circular clamp with grooved radius lines. This special exterior seat angle adjustment clamp fits snugly into one of 2 exterior side of the short and stubby U-shaped interior seat angle adjustment clamp. In the middle of this special clamp (and it the middle of the circular clamp on the interior side of this part) is a hole that the seat mounting bolt fits into. There are 2 of these small exterior seat angle adjustment clamps, each sold separately. The clamp is is a little worn but it is still in good shape, with plenty of gripping power. Reasonable used condition, with only a little wear and tear on the seat angle adjustment clamp. Sold "as is".
In Stock
Price: $3.95 $3.16
You Save: $0.79 (20%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sign In
